TC_M Firmware Update List
Remark: TC_M firmware is used for old M3 platform of VF30/T60/TC550/OC500/EP300/A300/OC180/D100/D200.
We can distinguish the platform by firmware, firmware of old M3 platform is under 3.XX.
V03.31 Update 14/10/20
1) Support character with four tones
V03.30 Update 14/10/16
1) Mode error when setting broadcast network para
V03.29 Update 14/07/02
1) Add self define time attendace status amount from 3 to 8
V03.28 Update 14/07/02
1) Messy code because of manufacture infomation is too long
V03.27 Update 14/06/21
1) Optimize fingerprint sensor
V03.26 Update 14/05/19
1) Set default wiegand mode to big endian,wiegan 34 mode
V03.25 Update 14/05/07
1) Set default wiegand mode to little endian,Wiegand 26 mode
V03.24 Update 14/04/25
1) Alarm when force entry
V03.23 Update 14/02/17
1) Blacklight flash after machine dormancy
V03.22 Update 14/01/25
1) 0x34/0x35 protocol 9 byte modify to:
1、Big endian、wiegand 26 mode
2、Little endian、wiegand 26 mode
3、Big endian、wiegand 34 mode
4、Little endian、wiegand 34 mode
2) VP30 Infrared tube doesn't work
V03.21 Update 14/01/22
1) Add protocol 0x34/0x35
2) Display 24 BIT CARD/32 BIT_CARD when boot up
V03.20 Update 14/01/16
1) Add Czech language
V03.19 Update 14/01/07
1) Fix bug of wiegand output mode 4
V03.18 Update 14/01/02
1) Add record when push Exit Button(User No:0 ,Backup No :0)
2) Add record when swap unkown card (User No:0XFF +(Card No>>20), Group No:(Card No & 0xFFFFF)}
3) Wiegand output add mode 4,output 32 bit card number
V03.16 Update 13/12/12
1) Add menu item "Collect threshold", range from 0 to 8,default value is 0
V03.13 Update 13/11/28
1) Broadcast port modify to 5060
V03.12 Update 13/11/05
1) Add network search protocol
V03.11 Update 13/10/23
1) Modify time calibrate function communication protocol
V03.10 Update 13/10/23
1) Add time calibrate function
V03.09 Update 13/10/11
1) Adjust fingerprint sensor para
V03.08 Update 13/10/11
1) Adjust fingerprint sensor para
V03.07 Update 13/10/11
1) Adjust fingerprint sensor para
V03.06 Update 13/07/30
1) Fix bug of software open door function
V03.05 Update 13/07/25
1)Set time frame from 29 to 32 to normally open
V03.03 Update 13/06/06
1) Fix bug: Can not boot up after burn program
V03.02 Update 13/05/24
1) Need admin verify when turn off
V03.01 Update 13/05/13
1) Support W25Q32FV
V02.XX
V01.XX