ads linkedin How to upgrade FaceDeep 3 Series firmware via USB stick? | Anviz Global

How to Enforcing Upgrade The FaceDeep 3 Series Firmware by USB Flash Drive?

Created by: Chalice Li
Modified on: Tue, June 1st 2021 at 16:12 



anviz logo

 


To downgrade or upgrade the special firmware for the FaceDeep 3 /FaceDeep 3 IRT devices, you need to enforce the upgrade of the FaceDeep 3 Series by USB Flash Drive.


The detail steps as below:
Step 1: Please prepare the USB Flash Drive with FAT format and capacity less than 8GB.

Step 2: Copy the firmware file to USB Flash Drive and plug the USB Flash Drive to the FaceDeep 3’s USB port.

Step 3: Setup FaceDeep 3 Series to enforcing firmware upgrade mode. 

main update

Enter into device Main menu, click Settings and select the Update.
 
update update

Please quick click the “USB Disk” icon in the FaceDeep 3 screen with (10-20 times) till popup the Update Password input interface.
 
update update

Input the “12345” and click “Enter” to
Forced upgrade mode! Click “Start” to upgrade the firmware. (Please make sure the USB Flash Drive already plug into device.)

 
update update

After upgrade the firmware please restart the device and check the Kernel Ver. from Basic Info is gf561464 to ensure the upgrade is successful. If not please check the opertaing steps and upgrade the firmware again.


basic info

 Please mail to support@anviz.com if you have any questions!                                                             
 Anviz Technical Support Team