C2/C3 New Version Firmware | Anviz Global

C2/C3 New Version Firmware



Subject:                   C2/C3 New Version Firmware 

Firmware version:     V3.24.81

Update Description:  Improve press C2/C3 device keypad lead to the device hung up issues.

                                     Improve the fingerprint sensor cannot scan or automatic scan issues. 

Remark:                      U disk reflash methods (Attention:Before you use the U disk to brush firmware,you must ensure that the machine could enter into the U  disk upgrade interface): 

                                    1. Creat new folder named "ANVIZ-C" in the U disk's root directory. 
                                    2. Copy the new version firmware into the ANVIZ-C folder. 
                                    3. Rename the firmware file to the TC.ROM (Attention: the extension must be ROM). 
                                    4. Insert U disk,then open it, last click the firmware file to execute the upgrade. 
                                    5. when the machine's executing progress reach 100%,there would appear one shot.After this,please click OK to go to the next.
                                    6. After that, the machine would restart by automatically.(Attention: the machine could not power off until the machine auto-restart successfully.
                                    After the machine enter into the standby interface by itself, that means the firmware upgrade successfully. 

                                    Here is the download link of this as below.