Anviz Global | Powering a Smarter World

How to Upgrade The FaceDeep 3 Series Firmware by USB Flash Drive?

Created by: Chalice Li
Modified on: Mon, July 12th 2021 at 17:44 


To upgrade the firmware for FaceDeep 3/ FaceDeep 3 IRT devices via the USB Flash Drive, you need to prepare a USB Flash Drive that is in FAT format and has less than 8GB storage.

The detailed steps are as below:

Step 1:  Please download the latest firmware of FaceDeep 3/ FaceDeep3 IRT from this link:

Note: To get a better experience with our latest firmware, please also update the audio file. l put the audio patch link as below. It's the same updating procedure as the firmware updating.

Step 2: Copy the firmware file to USB Flash Drive and plug the USB Flash Drive into the device USB port.

Step 3: Setup FaceDeep 3 Series to firmware upgrade mode. 

Enter into device Main menu, click Settings, and select the Update.

 Click “Start” to upgrade the firmware. (Please make sure the USB Flash Drive already plug into the device)

After upgrade the firmware please restart the device and check Firmware Ver. from Basic Info is 03.74.AJ-TM to ensure the upgrade is successful. If not, please check the operating steps and upgrade the firmware again.

Please mail to if you have any questions!     
Anviz Technical Support Team