How to Upgrade The FaceDeep 3 Series Firmware by USB Flash Drive?
Created by: Chalice Li
Modified on: Mon, July 12th 2021 at 17:44
To upgrade the firmware for FaceDeep 3/ FaceDeep 3 IRT devices via the USB Flash Drive, you need to prepare a USB Flash Drive that is in FAT format and has less than 8GB storage.
The detailed steps are as below:
Step 1: Please download the latest firmware of FaceDeep 3/ FaceDeep3 IRT from this link:
https://www.dropbox.com/s/52373u9ej1hs5d6/deep3%2003.74.AM.rar?dl=0
Note: To get a better experience with our latest firmware, please also update the audio file. l put the audio patch link as below. It's the same updating procedure as the firmware updating.
https://www.dropbox.com/s/no0v3y4z47u4hd9/deep3.aup?dl=0
Step 2: Copy the firmware file to USB Flash Drive and plug the USB Flash Drive into the device USB port.
Step 3: Setup FaceDeep 3 Series to firmware upgrade mode.
 |
 |
Enter into device Main menu, click Settings, and select the Update.
 |
 |
Click “Start” to upgrade the firmware. (Please make sure the USB Flash Drive already plug into the device)
 |
After upgrade the firmware please restart the device and check Firmware Ver. from Basic Info is 03.74.AJ-TM to ensure the upgrade is successful. If not, please check the operating steps and upgrade the firmware again.
Please mail to support@anviz.com if you have any questions!
Anviz Technical Support Team